Get started with Room Display 6

This information only applies to older generations of our software.

A complete step-by-step guide to start using Room Display 6

To start configuring your software you need to follow these simple steps:

Step 1: Register an account

1. Register for a user account at: https://www.roomdisplaycenter.com
2. Select “Room Display” in the Get Started Guide
3. Activate licenses
   • (New Users) Press “Redeem this Voucher” to activate one full 14-day trial license key
   • (Existing Users) Go to “License Voucher -> Redeem Voucher” and enter your voucher key number to activate licenses
4. You will now receive units under “Units -> Room Display”

Step 2: Configure units & add Google/Exchange calendars

1. Configure your unit(s) by pressing the cogwheel symbol then follow the guide. Note that for all settings there is aquestion mark symbol with further information.
2. Setup your Google/Exchange calendars by following either of these guides:
   For Exchange
   For Google

Step 3: Download app & connect devices

1. Download Room Display 6 software either from Google Play or directly to your device.
   For Room Display 6: https://www.roomdisplaycenter.com/download/roomdisplay6.apk
2. Login with your Room Display Center account details
3. Select your unit from the list
4. Settings will now be downloaded to the unit and you are all set up!

Troubleshooting:

If you experience problems during the setup, see the points below or go to ourFAQ:

• I cannot login with my Roomdisplaycenter account in the app
  • Check that you are using the correct user name and password. Double check by logging in to https://www.roomdisplaycenter.com.
  • Verify that your tablet has access to internet (open a page in the browser) and that the correct communication ports are open in the firewall. See: FAQ -> Room Display 4/5/6 -> Firewall ports
• There is an error message relating to Exchange/Calendars
  • Check step #2 in this configuration guide carefully, FAQ -> Exchange / Office 365 -> How to integrate Exchange with Room Display
• I cannot see/add/delete calendar information
  • It can take up to 1 minute for any changes in the calendar information to take effect, so be patient.
  • Check that your internet connection is unrestricted and that the correct communication ports are open in the firewall. See: FAQ -> Room Display 4/5/6 -> Firewall ports. For example many company guest networks restricts communication ports that Room Display need to function properly.